Digital Irrigation Programmer

Features of the digital irrigation programmer

The digital irrigation programmer allows you to select between 15 irrigation combinations and gives you a maximum of 8 irrigations per day , with which you can supply water to 10 of your plants. This equipment runs on batteries . Therefore, it does not matter if your crop is indoor or outdoor , you can use this programmer to automate the irrigation of your plants. It is important that you buy good quality batteries to prevent them from running out quickly, since it is a device that consumes a lot of energy.

How to use the digital irrigation programmer?

Easy! What you need is to place the direct digital programmer into a tap socket that connects to the water network. With the help of a 16 mm tube, connect the outlet of the equipment, while placing a dripper per pot as appropriate. After having it installed, it will be ready to program it based on the intensity and time you require.

How to automatically program the digital irrigation programmer?

Thanks to its buttons and small screen it is easy to operate. The first thing you need is to press the "Time" button until it is set to hours to set the current time. Then you press the program button and when "1 ON" appears you will indicate the exact moment you want the irrigation to start, specifying the days and time. While to select when to stop watering, press the program button again. When you see that the display indicates '1 Off' you will be ready to select the days and hours.